
Polyurea Waterproofing Coating
Polyurea-based protective waterproofing coating for demanding surfaces.
From US$6.00/kg
Factory-direct supply from Shunde, Foshan, China · EXW prices, FOB / CIF on request · WhatsApp +86 135 1658 7780
Côte d'Ivoire is a major West African economy centred on Abidjan, with construction and industry that need industrial floors, roof waterproofing and architectural paints. Kangwangqi supplies Ivorian distributors and contractors from China. This page is in English; we can take inquiry details in French by email or WhatsApp when that helps your team.
Abidjan is the principal container port. Share your forwarder’s marking rules and whether cargo stays in Abidjan or moves inland (Bouaké, San-Pédro corridor, etc.).
The southern coastal zone is humid tropical with heavy rainfall. Exterior paints and roof membranes must handle rain and heat; anti-rust systems protect steel in humid air; epoxy floors should be applied when concrete moisture is under control after the rainy season peaks.
Import conformity assessment for coatings should be confirmed with your Ivorian clearing agent (local conformity assessment – confirm with your clearing agent). Destination inspection programmes and required certificates can change by HS code. We provide TDS, MSDS and our held test reports.
Frequent needs: epoxy floors for warehouses and retail; rubber or polyurea waterproofing for flat roofs; interior and exterior emulsions for housing and offices; anti-rust for metalwork. Distributors often want a starter colour range from the K7 card.
Côte d’Ivoire has two main seaports: the Port Autonome d’Abidjan, which handles most of the country’s foreign trade, and the Port Autonome de San-Pédro in the south-west. Abidjan is also a regional gateway for Burkina Faso and Mali, so many Ivorian distributors also supply landlocked neighbours.
The south of the country, including Abidjan, has a long rainy season from about April or May to July, a short drier spell around August and September, and a short rainy season around October and November. December to March is the main dry season. With so many wet months on the coast, flat roofs, terraces and water tanks need a continuous waterproofing layer. Liquid rubber is used as a roof coating, polyurea on roofs and water tanks, and K11/JS cementitious slurry on wet rooms and foundations. The dry season is the best time to apply.
Côte d’Ivoire applies a Verification of Conformity (VoC) programme to imported goods, set up by Decree No. 2017-567 and run under the Ministry of Commerce. Goods on the programme list are checked before shipment in the exporting country by one of the appointed inspection companies (BIVAC/Bureau Veritas, COTECNA, Intertek or SGS). When they conform, the company issues a Certificate of Conformity (CoC), valid for three months, which the importer presents to customs through the single window (GUCE). The programme applies to imports with an FOB value of 1,000,000 FCFA or more. Confirm with the Ministry of Commerce or your inspection company whether your products are on the list.
For a first order to Côte d’Ivoire, send us the products, quantities, colours and packaging you need, your destination port and inland city, and the documents your clearing agent asks for. We quote EXW factory, Foshan (FOB / CIF on request) and confirm the minimum order quantity for each product. Paint and waterproofing materials should be stored sealed, in the shade and off the ground after arrival, and used within the shelf life stated on the label. If your project needs a specific standard or test, tell us before production so we can confirm what documents we can and cannot provide.
MOQ depends on product, colour and packaging. Samples are available on request. Tell us the product, quantity, colour and destination port - we usually reply within 1 business day.

Polyurea-based protective waterproofing coating for demanding surfaces.
From US$6.00/kg

Acrylic-based liquid rubber coating that cures into a flexible, UV-stable waterproof membrane for flat, low-slope and metal roofs.
From US$2.00/kg

Brush-applied waterproof slurries for wet areas and below-grade concrete: K11 nano-type waterproof slurry and JS polymer waterproof slurry.
From US$1.00/kg

Decorative seamless floor system: epoxy resin with colored quartz sand, two-component (A:B = 8:1).
From US$2.20/kg

Water-based silicone-acrylic exterior wall paint: waterproof, UV- and weather-resistant, with a smooth matte finish for facades.
US$1.20/kg

Water-based acrylic emulsion paint for interior walls and ceilings.
From US$1.20/kg

Protective primer and topcoat options for steel and metal surfaces, including water-based epoxy zinc-rich primer.
From US$2.00/kg
View all products · Certificates & data sheets · Colour library
Yes. We quote EXW factory, Foshan, or FOB / CIF with Abidjan as destination port. WhatsApp and email inquiries are welcome.
This website is in English. For Côte d'Ivoire clients we can handle inquiry details in French by email or WhatsApp when needed – write in the language that is easiest for you.
TDS, MSDS, commercial documents and certificates/test reports we hold (see the Certificates page). Local conformity assessment steps – confirm with your clearing agent.
Many distributors start with a mixed colour trial of emulsion and/or epoxy. MOQ depends on product and packaging – send your list and we will advise.
Include destination port, products and quantity. Sample requests welcome.
Our export team will contact you by email or WhatsApp. For a faster reply, message us on WhatsApp now.
WhatsApp: +86 135 1658 7780
Email: [email protected]
Factory: Fu'an Industrial Zone, Leliu Street, Shunde District, Foshan, Guangdong 528322, China
Tell us your project, market and quantities. We reply with product options, technical data and a quotation.
Tell us what you need. We reply by email or WhatsApp.
Our export team will contact you by email or WhatsApp. For a faster reply, message us on WhatsApp now.