Epoxy Colored-Sand Self-Leveling Floor Coating

Name: Epoxy Colored-Sand Self-Leveling Floor Coating
Brand: Kangwangqi

Decorative seamless floor system: epoxy resin with colored quartz sand, two-component (A:B = 8:1).

Coverageapprox. 1.5–2.5 kg/m²

Dry timeSurface dry ≤ 12 h; hard dry ≤ 48 h

VOCVery low VOC · French A+

Finish / Sheen:

MatteSemi-glossHigh gloss

Package size:

27 kg/bucket (component A) + hardener B (mix 8:1)

Colour: Standard / custom

All 184 colours →

Quantity:

Request Quote Request Sample WhatsApp

✉ Email us about this product · Add to compare · Coverage calculator

Decorative seamless floor system: epoxy resin with colored quartz sand, two-component (A:B = 8:1). Our team can advise on system selection, surface preparation and application for your project.

Typical uses: Factories, warehouses, showrooms, parking areas, commercial floors, GMP workshops, food plants.

Seamless, marble-like colored-sand texture
Very low VOC, water-based solvent-free system
Wear, heavy-load and impact resistant
Resists many acids, alkalis, salts and oils; inhibits mould
Usable on cement floors and old tile floors

Applications: Industrial, Commercial, Parking & garages · Surfaces: Concrete, Old tiles

Product type	Floor Coatings
Base	Water-based (2K, solvent-free)
Finish / sheen	Matte, Semi-gloss, High gloss
Packaging	27 kg/bucket (component A) + hardener B (mix 8:1)
Colours	K7 / RAL colour card and custom matching – see Colour Library
Minimum order	On request
Composition	Component A: epoxy resin with colored quartz sand; Component B: amine-based hardener
Mix ratio	A : B = 8 : 1 (by weight)
Packaging	27 kg/bucket (component A)
Theoretical consumption	approx. 1.5–2.5 kg/m²
Pot life	approx. 40 min at 25 °C
Drying time	Surface dry ≤ 12 h; hard dry ≤ 48 h
Recoat interval	12–24 h under standard conditions, after full drying
Application conditions	10–30 °C, relative humidity < 75 %
Return to service	Foot traffic after 24–48 h; normal use after 7 days curing
Application method	Trowel, then spiked roller to remove bubbles
Gloss options	Matte, semi-gloss, high gloss (≥ 80 GU after 24 h, in-house test)
Adhesion	≥ 4.7 MPa on tile substrate (GB/T 5210, in-house test)
Shore D hardness	≥ 80D after 24 h; ≥ 85D after 36 h (GB/T 2411)
Pencil hardness	≥ 5H after 36 h (GB/T 6739-2022)
Abrasion	Weight loss ≤ 0.01 g / 500 cycles, CS10, 750 g (GB/T 17681)
VOC / emissions	Very low VOC; French A+ emission class certificate
Certifications	French A+, RoHS, Certificate of Conformity

Source: Kangwang epoxy colored-sand brochure (2026) and in-house floor coating lab test report ZRO1221350209. Values are typical; always follow the product TDS for your project.

Epoxy Colored-Sand Self-Leveling Floor Coating

Technical documents

Related Products

Polyurea Waterproofing Coating

Rubber Roof Waterproofing Coating

Anti-Rust Paint

Looking for a reliable coatings supplier?