Coatings manufacturer supplying distributors & contractors across Africa✉ [email protected] · WhatsApp +86 135 1658 7780 · Find a distributor
Request a Quote

Waterproofing & Paint Supplier for Ethiopia

Factory-direct supply from Shunde, Foshan, China · EXW prices, FOB / CIF on request · WhatsApp +86 135 1658 7780

Ethiopia’s industrial parks and construction around Addis Ababa, Dire Dawa and regional cities need floor coatings, facade finishes and waterproofing. Ocean cargo typically enters through Djibouti then moves inland by road or rail. Kangwangqi quotes EXW factory, Foshan (FOB / CIF on request) and prepares documents for that routing.

Ports & logistics

Name Djibouti as the discharge port and Ethiopia as the final country. Inland haulage times and bond rules should be planned with your forwarder; carton strength and moisture protection matter on the long inland leg.

Climate & application notes

Addis Ababa sits at high altitude with cooler nights and strong UV; lowland areas are hotter. Curing of epoxy and emulsions can slow in cool highland nights – schedule application within the product temperature window. UV-stable exterior and fluorocarbon finishes suit highland sun exposure.

Import compliance

The Ethiopian Standards Agency (ESA) framework covers many products; import conformity steps should be confirmed with your Ethiopian clearing agent. We supply TDS, MSDS and available certificates (French A+, RoHS, EN 1504-2 where applicable).

What buyers in Ethiopia usually need

Project buyers often need epoxy floors for factories and warehouses, fluorocarbon or exterior systems for buildings, and waterproofing for roofs and wet areas. Distributors may mix wall paints with industrial lines in one container.

Ethiopia local guide: ports, rainy season and import rules

Main import route

Ethiopia is landlocked, and nearly all of its sea-borne trade passes through the Port of Djibouti; in fiscal 2025/26 Djibouti handled about 97% of Ethiopia’s gateway cargo. From Djibouti, goods move to Addis Ababa by road or by the Addis Ababa–Djibouti railway. Share your consignee details and inland destination early so the shipping documents match the transit procedure.

Rainy season and what it means for waterproofing

Ethiopia’s main rainy season, the kiremt, runs from about June to September, and a shorter belg season falls between about February and May. In the highlands, including Addis Ababa, the kiremt brings long periods of heavy rain. Roofs, terraces, basements and water tanks need protection before the rains start. Liquid rubber is used as a roof coating, polyurea on roofs and water tanks, and K11/JS cementitious slurry on wet rooms and below-ground walls. The best window for exterior application is the dry season from about October to January.

Import requirements for paints and coatings

Ethiopia’s Ministry of Trade and Regional Integration enforces mandatory (compulsory) Ethiopian standards for imported products, including paints. The compulsory standards catalogue published on the national standards body’s website (ethiostandards.org) lists, for example, standards for emulsion paints and enamel paints, and the Ministry began enforcing a new set of mandatory standards that included paints in June 2025. Importers may need a conformity certificate, appropriate labelling and an import permit. Requirements change, so confirm the current rules for your products with the Ministry, the Ethiopian Conformity Assessment Enterprise or your clearing agent before ordering.

Planning a first order

For a first order to Ethiopia, send us the products, quantities, colours and packaging you need, your destination port and inland city, and the documents your clearing agent asks for. We quote EXW factory, Foshan (FOB / CIF on request) and confirm the minimum order quantity for each product. Paint and waterproofing materials should be stored sealed, in the shade and off the ground after arrival, and used within the shelf life stated on the label. If your project needs a specific standard or test, tell us before production so we can confirm what documents we can and cannot provide.

Waterproofing products for Ethiopia

MOQ depends on product, colour and packaging. Samples are available on request. Tell us the product, quantity, colour and destination port - we usually reply within 1 business day.

Request a Quote WhatsApp Become a distributor

Recommended products for Ethiopia

Liquid Rubber Roof Waterproofing Coating
Waterproofing

Liquid Rubber Roof Waterproofing Coating

Acrylic-based liquid rubber coating that cures into a flexible, UV-stable waterproof membrane for flat, low-slope and metal roofs.

From US$2.00/kg

  • ◐Matte
  • 💧Acrylic elastomeric (liquid rubber)
  • ▦Concrete, Metal
Kangwang K11 & JS cementitious waterproof slurry – yellow Kangwang bucket on a waterproofing job site
Water-based
Waterproofing

K11 & JS Cementitious Waterproof Slurry

Brush-applied waterproof slurries for wet areas and below-grade concrete: K11 nano-type waterproof slurry and JS polymer waterproof slurry.

From US$1.00/kg

  • ◐Finish: on request
  • 💧Water-based (polymer-modified cementitious)
  • ▦Concrete, Masonry & render
Fluorocarbon Paint
Water-based
Industrial & Metal

Fluorocarbon Paint

Water-based fluorocarbon finish coating for architectural and metal applications.

From US$7.00/kg

  • ◐Matte · Semi-gloss · High gloss
  • 💧Water-based
  • ▦Steel & metal, Masonry & render
Anti-Rust Paint
Water-based
Industrial & Metal

Anti-Rust Paint

Protective primer and topcoat options for steel and metal surfaces, including water-based epoxy zinc-rich primer.

From US$2.00/kg

  • ◐Matte · Semi-gloss · High gloss
  • 💧Water-based
  • ▦Steel & metal

View all products · Certificates & data sheets · Colour library

Ethiopia - FAQ

Do you ship via Djibouti for Ethiopia?

Yes – EXW factory, Foshan, or FOB / CIF on request, with Djibouti named for discharge when that is your route. Confirm inland details with your forwarder.

What is ESA for coatings?

ESA-related conformity assessment may apply depending on HS code. Your agent confirms the checklist; we prepare technical documents.

Does altitude affect epoxy curing in Addis?

Cooler highland nights can extend drying times. Keep application within about 10–30 °C and RH below 75 % as per the epoxy brochure, and allow full cure before traffic.

Can you match project colours?

Colours follow our K7 / RAL card; custom matching is discussed for project-size orders.

Inquiry for Ethiopia

Include destination port, products and quantity. Sample requests welcome.

* Required   ** Email or WhatsApp – at least one

Chat on WhatsApp

We reply by email or WhatsApp, usually within 1 business day. Your details are used only to answer your inquiry. Privacy

Direct contact

WhatsApp: +86 135 1658 7780

Email: [email protected]

Factory: Fu'an Industrial Zone, Leliu Street, Shunde District, Foshan, Guangdong 528322, China

Looking for a reliable coatings supplier?

Tell us your project, market and quantities. We reply with product options, technical data and a quotation.

Request a Quote Chat on WhatsApp Email us
WhatsApp