
Polyurea Waterproofing Coating
Polyurea-based protective waterproofing coating for demanding surfaces.
From US$6.00/kg
Factory-direct supply from Shunde, Foshan, China · EXW prices, FOB / CIF on request · WhatsApp +86 135 1658 7780
Uganda is landlocked; most ocean containers for Kampala, Entebbe, Jinja and industrial parks move through Mombasa (Kenya) then by road or rail on the Northern Corridor. Kangwangqi supports Ugandan importers with factory supply and documents suited to transit cargo.
Plan the routing as China → Mombasa → Uganda. Transit and bond procedures differ from direct Kenya imports – your forwarder and clearing agent should specify marks, seals and transit documents. We align commercial invoices and packing lists with the routing you give us.
Much of Uganda is warm and humid with two rainy seasons in many regions. Warehouse floors need wear-resistant epoxy; roofs need reliable waterproofing; exterior paints face heavy rain and strong sun near the equator.
The Uganda National Bureau of Standards (UNBS) administers standards and conformity assessment for many imports. Confirm whether your paint category needs PVoC-style checks or destination inspection with your Ugandan agent. Technical documents from our certificates page support the file.
Typical needs: epoxy floors for light manufacturing and warehouses around Kampala; interior and exterior emulsion for housing; rubber roof coatings; anti-rust for steel. Mixed containers shared with Kenyan partners are sometimes used – tell us if that is your model.
Uganda is landlocked. Most imports arrive by sea at Mombasa, Kenya, and travel along the Northern Corridor to Kampala, about 1,150 km by road. The Central Corridor through Dar es Salaam, Tanzania, is the main alternative. Tell us which port and route your forwarder uses so we can prepare documents for transit.
Southern and central Uganda, including Kampala, has two rainy seasons, about March to May and September to November, while the north has a single longer season from about April to October (World Bank Climate Change Knowledge Portal). Frequent rain means roofs, gutters and water tanks need a durable, continuous waterproofing layer. Liquid rubber roof coating is suited to roofs, polyurea to roofs and water tanks, and K11/JS cementitious slurry to wet rooms and foundations. Apply in the dry spells (about December to February and June to August) and only on a dry surface.
The Uganda National Bureau of Standards (UNBS) runs the Pre-Export Verification of Conformity (PVoC) programme. According to UNBS, products covered by compulsory Uganda standards with an FOB value above USD 2,000 must be inspected in the country of export and accompanied by a Certificate of Conformity (CoC). Goods that should have gone through PVoC but arrive without a CoC face a 15% surcharge on CIF value and full destination inspection. Lower-value consignments are inspected on arrival. According to TÜV Rheinland, a UNBS-authorised inspection body, CoC requests for goods from China must be submitted through the Uganda Electronic Single Window. Confirm whether your coatings are covered by a compulsory standard with UNBS or your clearing agent.
For a first order to Uganda, send us the products, quantities, colours and packaging you need, your destination port and inland city, and the documents your clearing agent asks for. We quote EXW factory, Foshan (FOB / CIF on request) and confirm the minimum order quantity for each product. Paint and waterproofing materials should be stored sealed, in the shade and off the ground after arrival, and used within the shelf life stated on the label. If your project needs a specific standard or test, tell us before production so we can confirm what documents we can and cannot provide.
MOQ depends on product, colour and packaging. Samples are available on request. Tell us the product, quantity, colour and destination port - we usually reply within 1 business day.

Polyurea-based protective waterproofing coating for demanding surfaces.
From US$6.00/kg

Acrylic-based liquid rubber coating that cures into a flexible, UV-stable waterproof membrane for flat, low-slope and metal roofs.
From US$2.00/kg

Brush-applied waterproof slurries for wet areas and below-grade concrete: K11 nano-type waterproof slurry and JS polymer waterproof slurry.
From US$1.00/kg

Decorative seamless floor system: epoxy resin with colored quartz sand, two-component (A:B = 8:1).
From US$2.20/kg

Water-based acrylic emulsion paint for interior walls and ceilings.
From US$1.20/kg

Water-based silicone-acrylic exterior wall paint: waterproof, UV- and weather-resistant, with a smooth matte finish for facades.
US$1.20/kg

Protective primer and topcoat options for steel and metal surfaces, including water-based epoxy zinc-rich primer.
From US$2.00/kg

Coatings for finishing and protecting wooden furniture and joinery.
From US$3.00/kg
View all products · Certificates & data sheets · Colour library
Containers usually discharge at Mombasa and move inland under transit arrangements. Name Uganda as final destination and Mombasa as discharge port in your inquiry.
Requirements depend on the product HS code. Ask your clearing agent for the current UNBS / conformity path; we provide TDS, MSDS and certificates.
Yes – request a sample on the form or via WhatsApp. Sample freight into Uganda is confirmed case by case.
Interior latex / emulsion and exterior wall paint are common, with colours from our K7 card. Epoxy floors are used in commercial and light-industrial spaces.
Include destination port, products and quantity. Sample requests welcome.
Our export team will contact you by email or WhatsApp. For a faster reply, message us on WhatsApp now.
WhatsApp: +86 135 1658 7780
Email: [email protected]
Factory: Fu'an Industrial Zone, Leliu Street, Shunde District, Foshan, Guangdong 528322, China
Tell us your project, market and quantities. We reply with product options, technical data and a quotation.
Tell us what you need. We reply by email or WhatsApp.
Our export team will contact you by email or WhatsApp. For a faster reply, message us on WhatsApp now.